FIRMWARE RELEASE NOTE ===================== Products affected: AXIS A1601 Release date: 2018-08-01 Release type: Production Firmware version: 1.83.1 Previous Release: 1.83.0(Initial production only) ONVIF Support: Profile C, Profile A -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. New features in 1.83.1 ================================================================================ 1.83.1:F1 Initial release for AXIS A1601 Network Door Controller Known Bugs/Limitations ================================================================================ 1.83.1:L1 If upgrading from 1.83.0 to 1.83.1, IO settings done on port 5 and port 6 are not migrated to port 13 and port 14 (which are the new names for these physical ports in 1.83.1). We strongly recommend upgrading with factory default going from 1.83.0(Initial Production FW only) to 1.83.1. 1.83.1:L2 Supervised input with a REX configured as Active low is not supported. 1.83.1:L3 Supervised input with a Wiegand reader tamper wire is not supported