FIRMWARE RELEASE NOTE ======================== Products affected: V5938 Release date: 2021-04-28 Release type: Production Firmware version: 10.5.2 Preceding release: 10.5.0 -------------------------------------------------------------------------------- Upgrade recommendations ======================== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired AXIS OS version. For example, if the device currently is running AXIS OS 7.40 and you want to upgrade to the latest AXIS OS Active Track (Example: 10.1, October 2020) then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80 LTS => 10.1. More detailed recommendations can be found in the AXIS OS portal at https://www.axis.com/support/firmware. Upgrade the firmware according to the instructions given in howtoupgrade.txt, which is included in the firmware folder or according to instructions at https://www.axis.com/support/firmware. NOTE ======================== For latest information about Axis Cybersecurity, see: https://www.axis.com/support/product-security Features in 10.5.0 ================================================================================ 10.5.0:F1 RTSP and HTTP stream URL:s now allow for filtering overlays based on overlay type. This is done by setting 'overlays=' in the URL (only one value). 10.5.0:F2 Added support for Day-night shift in On Screen Control 10.5.0:F3 Updated pjsip to version 2.10 to increase overall cyber security. 10.5.0:F4 OpenSSL upgraded to 1.1.1j to fix CVE-2021-23841 and CVE-2021-23840. Corrections in 10.5.2 ================================================================================ 10.5.2:C1 Corrected an issue that on some occasions prevented an upgrade to firmware version 10.5.0. 10.5.2:C2 Corrected an issue that could cause O3C-based connections with the device to be interrupted. Corrections in 10.5.0 ================================================================================ 10.5.0:C1 Increased the number of allowed characters for event condition name to 512. 10.5.0:C2 Corrected an issue that prevented the use of some special characters in ONVIF passwords. 10.5.0:C3 Corrected an issue that prevented the Axis device to respond with HTTP 403 Forbidden when the source-ip address was blocked when using PreventDOSAttack in Plain Config -> System. Previously HTTP 401 Unauthorized was returned. Known Bugs/Limitations ================================================================================ Supported AXIS VAPIX API Image Resolutions for V5938 ================================================================================ Resolution Exceptions Capture mode ------------ ------------ -------------- 3840x2160 2) 1920x1080 2) 3) 4) 1280x720 2) 3) 4) 5) 800x450 2) 3) 4) 5) 480x270 2) 3) 4) 5) 320x180 2) 3) 4) 5) 1280x960 1) 2) 3) 4) 1024x768 1) 2) 3) 4) 5) 1024x576 1) 2) 3) 4) 5) 800x600 1) 2) 3) 4) 5) 768x576 1) 2) 3) 4) 5) 720x576 1) 2) 3) 4) 5) 704x576 1) 2) 3) 4) 5) 704x480 1) 2) 3) 4) 5) 704x288 1) 2) 3) 4) 5) 704x240 1) 2) 3) 4) 5) 640x480 1) 2) 3) 4) 5) 640x360 1) 2) 3) 4) 5) 480x360 1) 2) 3) 4) 5) 384x288 1) 2) 3) 4) 5) 352x288 1) 2) 3) 4) 5) 352x240 1) 2) 3) 4) 5) 320x240 1) 2) 3) 4) 5) 240x180 1) 2) 3) 4) 5) 192x144 1) 2) 3) 4) 5) 176x144 1) 2) 3) 4) 5) 176x120 1) 2) 3) 4) 5) 160x120 1) 2) 3) 4) 5) 160x90 1) 2) 3) 4) 5) analyze 1) 2) 3) 4) 5) 1) Not visible in web user interface 2) 4K @ 25/30 fps 3) 1080p @ 50/60 fps 4) 1080p @ 25/30 fps 5) 720p @ 50/60 fps