FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS V5914

Release date:      2015-04-23

Release type:      Production

Firmware version:  5.75.1

File name:         V5914_5_75_1.bin

Preceding release: First release

AMC version:       7.1.2.2-1

Onvif support:     Profile S

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


Known Bugs/Limitations
======================

5.75.1:L01
When the automatic IR cut filter enables/disables the IR cut filter, it may
trigger motion detection.

5.75.1:L02
Recording streams to SD Card with a total bit rate above 12Mbit/sec may cause
missing frames/sequences.

5.75.1:L03
To avoid corrupt recordings, it is recommended to unmount the SD Card before
ejecting it.

5.75.1:L04
When changing an active https-certificate, the product needs to be restarted for
the new certificate to be applied.

5.75.1:L05
The framerate may be lower than expected when streaming MJPEG over https

5.75.1:L06
Time modifiers used in the field "Create folder" is only used upon activation of
the rule, hence no new folders are created with the current time during an
active rule.

To have new folders created with time modifiers you should add them in the "Base
filename".

5.75.1:L07
To be able to seek in exported mkv recordings you need to use AXIS Matroska File
Splitter, see axis.com. Files are playable both with and without AXIS Matroska
File Splitter.

5.75.1:L08
If setting the video stream resolution to an unsupported value, it's not
possible to start streaming without specifying a valid resolution or correcting
the video stream resolution to a supported resolution.

5.75.1:L09
SNMP OID that have been set are not kept after reboot.

5.75.1:L10
The pixel counter scales with the video in when streaming H.264 video via AMC
which may make it hard to use.

5.75.1:L11
Pan limits set using VAPIX are not reflected using ONVIF.

5.75.1:L12
Notice: some receivers does not support receiving empty messages, these will
trigger an exception and block further notifications.

5.75.1:L13
The live stream is not updated when using tilt arrows in some revisions of
Internet Explorer 9. The stream will update again once the mouse pointer is not
hovering over the arrow icon.

5.75.1:L14
Video stream is not available when using IPv6 with Internet Explorer 11 and AMC.


5.75.1:L15
Using special characters § ½ ! £ \ ” @ [ ] ’ $ ¤ {}& * ? ^¨~+ =´ ` < > | , ; :
in the upload folder name will not work as expected.

5.75.1:L16
After uploading a new application, the installed applications list web page
needs to be manually reloaded for it to be updated.

5.75.1:L17
It's not possible to set the RTPS timeout in the URL specifying the stream. The
default value of 120 seconds will always be used.


Supported AXIS VAPIX API Image Resolutions for AXIS V5914
========================================================================================

Resolution  Exceptions
==========  ==========
1280x720
800x450
480x270
320x180

1024x768    1)
1024x576    1)
800x600     1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
640x480     1)
640x360     1)
480x360     1)
384x288     1)
352x288     1)
352x240     1)
320x240     1)
240x180     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x90      1)

1) Not visible in web user interface