PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2010-02-01

Release type: Production

Driver version: 2.05

Filename: Cohu-2.05_crisv32.ptz

Previous release: none

---------------------------------------------------------------------

Release 2.05
=============

2.05:1 This is the first driver.


Known problems and limitations in version 2.05
==============================================

Note! Some limitations are also model dependent and can behave
      different on different Cohu models!

2.05:2 To use this version of the driver, firmware 4.47 or higher
       is required.

2.05:3 Tilt movement limits are sometimes exceeded during continuous
       movement when set close to the mechanical limits.

2.05:4 A camera address must already be assigned to a Cohu PTZ device
       before using it with this driver (the Cohu PTZ device have no
       DIP-switches for assigning camera addresses).

2.05:5 A zoom move will set autofocus=on. After a zoom move, a short
       delay is required before a manual focus move is possible.

2.05:6 When saving a preset in the Cohu PTZ unit ("device presets"),
       the digital zoom position is not saved (e.g. "device presets"
       are only saved in optical zoom area).

2.05:7 When saving a preset position, only pan, tilt and zoom positions
       are saved in the preset.