FIRMWARE RELEASE NOTES
======================

Products involved: AXIS Q6035-E PTZ Dome Network Camera

Release date:      June 22, 2011

Release type:      Production

Firmware version:  5.25

File name:         Q6035-E_5_25.bin

File size:         "22282264 bytes"

Preceding release: n/a

AMC version:       5.9.10.1-1

---------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


RELEASE 5.25
============

5.25 is the first official release for AXIS Q6035-E.

Known limitations
=================

5.25:L01 The web interface for ACAP Image Test application looks odd compared
         to the normal webinterface

5.25:L02 Pan and tilt operation are not available using the T8412 Installation
         Display.

5.25:L03 Unclear error message when uploading audio clip with already existing
	 name.

5.25:L04 Wrong text in tool tip on Listen/Talk button in AMC.

5.25:L05 PTZ Home positon not defined at first boot after factory default.

5.25:L06 SNMP Silvercreek test 5.4.0.1 over IPv6 will fail.

5.25:L07 The camera web pages may be unreachable after changing the IP address
         when the camera has been connected to AXIS Internet Dynamic DNS Service.

5.25:L08 Occational script errors in live view. In rare occations a popup is
	 displayed indicating a script error in the web page, but all
	 functionallity works as expected.

5.25:L09 A few black pixels can be seen in right edge of the picture in NTSC cameras.

5.25:L10 SNMPv3 SilverCreek 4.20.8 (IPv6).

5.25:L11 When recording seral streams at the same time to SD card, some frames are
	 missing from the recording.

5.25:L12 Web interface layout incorrect when playing recording with low resolution.

5.25:L13 When requesting 24kbit audio streams all that is recieved is a lot of static noise.

5.25:L14 No warning message in log when pre-trigger buffer is too large.

5.25:L15 MJPG recordings to SD card with too high bitrate may cause oom kill of monolith.
	 Lower the bitrate to a rate the SD card/controller can handle. Cant give specifics
	 since it differs between SD cards.

5.25:L16 Cannot record audio clip with no wait time. You must wait at least 1 second.

5.25:L17 Uploading an expired or not yet valid encrypted client certificate in
         PKCS#12 format for 802.1x will succeed instead of being rejected as it
         should be.

5.25:L18 Recorded video stream freezes at start of second mkv recording part.
	 Fix for problem included but large the large resolution in Q6035-E still
	 makes the video choppy.

5.25:L19 Recording stability fails
	 Fix for problem included but large the large resolution in Q6035-E still
	 makes the video choppy.

5.25:L20 PTZ Compensation in tilt=-200 does not work as expected.
	 Movements between -200 and 20 degrees in tilt sometimes stop at 0 degrees.


Application Developer Information
=================================

The AXIS VAPIX Application Programming Interface is supported by the
AXIS Q6035-E.

The following groups are supported by this product.
For more information, please refer to the AXIS VAPIX HTTP API specification
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Group                  Exceptions
=====                  ==========
General
Image and Video        Video status (videostatus.cgi)
                       JPEG buffer request (buffer/command.cgi)
                       Image overlay (call_overlay_<command>.cgi)
                       MPEG-4
                       Dynamic text overlay (dynamicoverlay.cgi)
                       Privacy Masks (privacymask.cgi)
PTZ                    PTZ driver update (ptzupdate.cgi)
                       PTZ administration (ptzadmin.cgi)
                       Set PTZ parameters (ptzparam.cgi)
Motion Detection
IP filter
Audio
Language handling
Local Storage
Temperature control


Built in templates for dynamic parameters are:

Template               Group
========               =====
'event'                Event
'ftpaction'            Event.E#.Actions
'httpaction'           Event.E#.Actions
'hwaction'             Event.E#.Actions
'ptzaction'            Event.E#.Actions
'ptzsensoraction'      Event.E#.Actions
'recordaction'         Event.E#.Actions
'smtpaction'           Event.E#.Actions
'tcpaction'            Event.E#.Actions
'ftp_config'           EventServers.FTP
'http_config'          EventServers.HTTP
'tcp_config'           Eventservers.TCP
'customexposurewindow' ImageSource.I#.Sensor
'motion'               Motion
'button'               PTZ.Auxiliary.A1.Button
'ptzlocator'           PTZ.Locator.L#.Zone
'position'             PTZ.Preset.P0.Position
'user_ctlqueue'        PTZ.UserCtlQueue
'streamprofile'        StreamProfile
'streamcache'          StreamCache


Supported AXIS VAPIX API Image Resolutions for AXIS Q6035-E.

Resolution  Exceptions
==========  ==========
1920x1080
1280x720
800x450
480x270
320x180

1280x960	1)
1024x768	1)
1024x576	1)
800x600		1)
768x576		1)
720x576		1)
704x576		1)
704x480		1)
704x288		1)
704x240		1)
640x480		1)
640x360		1)
480x360		1)
384x288		1)
352x288		1)
352x240		1)
320x240		1)
240x180		1)
192x144		1)
176x144		1)
176x120		1)
160x120		1)
160x90		1)

1) Not visible in web pages

90/270 degress rotation is not supported.