FIRMWARE RELEASE NOTES ====================== Products affected: AXIS Q2901-E PTMount Release date: 2016-11-08 Release type: Production Firmware version: 6.30.1.2 File name: Q2901-E_PT_Mount_6_30_1_2.bin Preceding release: 6.30.1.1 -------------------------------------------------------------------------------- UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Corrections in 6.30.1.2 since 6.30.1.1 ====================================== 6.30.1.2:C01 Fixed security vulnerability CVE-2016-5195. Known Bugs/Limitations ====================== 6.30.1.2:L1 The status LED is unlit during the boot-up sequence and then goes steady green when system is ready. 6.30.1.2:L2 RTSP over TCP may cause choppy video if block size is not optimized or set during video connection. 6.30.1.2:L3 Recording streams to SD card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. 6.30.1.2:L4 Text modifiers #x #y #z #Z #L do not work for upload file/folder names, TCP/HTTP notification text or e-mail subject/message. 6.30.1.2:L5 When downgrading to an older firmware, the root password might be changed back to its default password. 6.30.1.2:L6 Capture mode change might require a camera restart to get full FoV. 6.30.1.2:L7 Using identical start and stop time for a scheduled event will never trigger an event. 6.30.1.2:L8 Some special UTF-8 characters can not be used for privacy mask names. Supported AXIS VAPIX API Image Resolutions for AXIS Q2901-E PTMount =================================================================== Resolution Exceptions ========== ========== 720x576 672x512 640x512 640x480 480x360 384x288 336x256 320x256 320x240 240x180 176x144 160x128 160x120 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x120 1) 80x60 1) 1) Not visible in web user interface 2) Available for Overview view