FIRMWARE RELEASE NOTE
======================

Products affected: AXIS P5534-E PTZ Dome Network Camera

Release date:      2018-04-11

Release type:      Production

Firmware version:  5.41.4

File name:         P5534-E_5_41_4.bin

Preceding release: 5.40.9.10

--------------------------------------------------------------------------------

Upgrade instructions
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.


Corrections in 5.41.4 since 5.40.9.10
=====================================

5.41.4:C01
Corrected critical security vulnerability ACV-128401.


Known Bugs/Limitations
======================

5.41.4:L01
Limiting the bandwidth to lower than 100kbit/s may lead to
losing contact with the camera

5.41.4:L02
An uploaded bitmap overlay is made partially transparent
unconditionally (black color).

5.41.4:L03
Maximum brightness will not result in a white image.

5.41.4:L04
No more than 4 privacy masks can be placed so close together that
they are in the same view at any given time.

5.41.4:L05
Stream profile names are limited to alphanumerical characters.

5.41.4:L06
If RTSP authentication is switched off, streaming H.264 with QuickTime
and other Apple compatible clients will not work as they require
authentication of the RTSP, but do not allow HTTP authentication.

5.41.4:L07
Using ONVIF, the camera declares that is supports the Normalized
Digital Zoom spaces but the camera does not and should not support
those spaces.

5.41.4:L08
The ONVIF command 'gotoHomePosition' will go to the home position at a
very slow speed, it will not use the default speed.

5.41.4:L09
If PTZ limits are changed, the camera must be restarted for the changes
to be applied to the ONVIF API.

5.41.4:L10
If a Go to Preset movement includes an AutoFlip, the image will
freeze during the whole movement. When the movement is done, the stream
will start again. Movement will also be done at full speed, regardless
of the current speed configuration.

5.41.4:L11
Automatic IR Cut Filter will not work if Auto Iris is off.

5.41.4:L12
When the automatic IR cut filter enables/disables the IR cut filter,
it may trigger motion detection.

5.41.4:L13
Removing a Guard Tour while another Guard Tour is running will stop
and restart the ongoing Guard Tour.

5.41.4:L14
Pan/tilt coordinate directions presented in the text overlay (#x #y)
will not be rotated along with the image when rotation is 180.

5.41.4:L15
The image is always showed with zero rotation at the OSDI Zone Setup.

5.41.4:L16
Recording streams to SD Card with a total bit rate above
12Mbit/sec may cause missing frames/sequences.

5.41.4:L17
If a customer is trying to upload a very large file instead of a
valid language file, a "404 page cannot be displayed" page is shown.

5.41.4:L18
Date modifiers "%m-%d-%Y" are not formatted correctly when used
with folder name, SMTP subject and message.

5.41.4:L19
Zoom response is very slow when using the mouse scroll wheel in AMC.

5.41.4:L20
Pan/tilt/zoom control does not work using Java Applet if the Control
Queue is enabled.

5.41.4:L21
Live view may display screen tearing (horizontal cut-lines) most
prominent when panning the camera.

5.41.4:L22
Firefox can sometimes show white image flicker at the bottom of the
video stream. This occurs on Windows XP and Windows Vista with Firefox
versions 3.6.3-3.6.6 (possibly on later versions as well).

5.41.4:L23
Color parameter has no effect when pulling RTSP stream with color=0.

5.41.4:L24
Frame Size Control does not affect size of the snapshot taken with the upper
right control that can be added to the Live View.

5.41.4:L25
It is recommended to unmount the SD Card before ejecting it.

5.41.4:L26
Recordings made with firmware earlier than 5.20 will not be readable
on the SD Card from the 5.40 firmware. Backup important recordings and
reformat the SD Card after the firmware upgrade.

5.41.4:L27
Check and repair is only available if the file system is ext4.

5.41.4:L28
When using action rule resulting in short recordings, it is recommended
to extend post-event time.


Application Developer Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by the AXIS
P5534-E. For more information, please refer to the AXIS VAPIX HTTP API specification
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Supported AXIS VAPIX API Image Resolutions for AXIS P5534-E

Resolution  Exceptions
==========  ==========

1280x720
800x450
480x270
320x180

1024x768    1)
1024x576    1)
800x600     1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
640x480     1)
640x360     1)
480x360     1)
384x288     1)
352x288     1)
352x240     1)
320x240     1)
240x180     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x90      1)

1) Not visible in web user interface

90/270 degrees rotation is not supported.