FIRMWARE RELEASE NOTE 
=====================

Products affected: 	AXIS P3384-V/VE

Release date: 		2016-01-20 

Release type: 		Production

Firmware version:  	6.10.1

File name:         	P3384_6_10_1.bin

Preceding release: 	5.60.1.4

--------------------------------------------------------------------------------

Upgrade instructions
=====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at 
http://www.axis.com/support/tecnical-notes/how-to-upgrade, 
or howtoupgrade.txt, which is included in the firmware folder.


New features
============

6.10.1:F1
Edge storage recording robustness is improved with an automatic database repair 
feature. 

6.10.1:F2
SNMP MIB r/w OID values are saved after reboot. 

6.10.1:F3
Secure FTP (SFTP) is now supported for a more secure file transfer method. 

6.10.1:F4
Edge Storage robustness is improved with features to detect and repair faults 
due to unexpected loss of storage media.  

6.10.1:F5
Storage limit offers a possibility to control how much storage space may be 
used for recordings. This is available via VAPIX. 

6.10.1:F6
Axis network cameras now support NAS drives over 2TB. 

6.10.1:F7
AXIS Video Motion Detection 3, which includes Axis False Alarm Filtering, is 
now a pre-installed ACAP application and replaces the built-in Motion Detection 
in the product Web GUI. The built-in Motion Detection is still available via 
VAPIX.   
Axis strongly recommends current users of the Motion Detection API to plan for 
transfer to the AXIS Video Motion Detection 3 API, please see the VAPIX 
Library. 

6.10.1:F8
Available ONVIF Media Profiles are now presented and configurable using the 
product Web GUI. 

6.10.1:F9
With SD card Encryption it is now possible to enable encryption of the SD card 
to protect your data. This encryption is transparent to users and VMS solutions 
making it possible to activate without adaptations.  
This feature is presented and configurable both in the Web GUI and via VAPIX.  

6.10.1:F10
Improved start-up time. 

6.10.1:F11
Removed predefined stream profiles: Quality, HDTV, Balanced, Bandwidth, Mobile. 

6.10.1:F12
Upgrade OpenSSL to version 1.0.2d. This version also provides support for TLS 
1.2. 

6.10.1:F13
The API Event Handling 1.10 is being removed from this release. If events 
have been previously added with this api, they need to be converted using the 
convert button in the Action Rules web page _before_ upgrading to 6.10. 
Failing to do this will result in all event configurations being lost. 

6.10.1:F14
Max exposure time parameter is now available in the Camera Settings. It can be 
used in LPR installations when setting Max exposure time shorter than default 
Max shutter time. 


Corrections
============

6.10.1:C1
It is now possible to a select starting point when playing back a recording 
while using multicast and H.264. 

6.10.1:C2
When DST is enabled, export recordings can now be done via web interface. 

6.10.1:C3
Reduced audio noise levels from internal microphone. 

6.10.1:C4
PullMessages now follow the ONVIF specification 9.1.2. 

6.10.1:C5
Rule is now triggered on start event/signal raise and not on condition. 

6.10.1:C6
Users with admin permissions can edit ACAP configuration settings. 

6.10.1:C7
Rectified pulsing of the image in very bright environment. 

6.10.1:C8
Improved Privacy mask alignment. 

6.10.1:C9
Manual triggers for all enabled View Areas are shown. 

6.10.1:C10
Improved synchronization between sound and video when having low fps and long 
GOV length. 

6.10.1:C11
Fixed issue with image switching between black/white and color mode. 

6.10.1:C12
Corrected H264 payloader behaviour to now insert PPS/SPS frames before every 
I-frame. This will improve behaviour, especially with Genetec clients that uses 
multicast. 


Known Bugs/Limitations
============

6.10.1:L1
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause 
missing frames/sequences. 

6.10.1:L2
In case you have upgrade issues make sure you are upgrading from latest 
available service release. For more information see FAQ "Upgrade issues to 
6.10".

6.10.1:L3
Every time you start a continuous recording, to a sd card or network share,
a warning about the storage being locked appear. Even though it's not locked.
Recording starts when OK is pressed. 


Resolution Exceptions
========== ===========

1280x960    
1280x720    
1024x768    
1024x640    
800x600     
800x500     
800x450     
640x480     
640x400     
640x360     
480x360     
480x300     
480x270     
320x240     
320x200     
320x180     
240x180     
176x144     
160x120     
160x100     
160x90      

1400x1050   1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)
80x50       1)

1) Not visible in web user interface