FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS P3344 Fixed Dome Network Camera

Release date:      2012-02-29

Release type:      Production

Firmware version:  5.40.9

File name:         P3344_5_40_9.bin

Preceding release: 5.40.4

AMC version:       6.0.6.7-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


Corrections in 5.40.9 since 5.40.4
==================================

5.40.9:C01  Modifier #t for event notification works as expected.

5.40.9:C02  GOV length 1 in combination with enabled User Data does not give 
            black image anymore.

5.40.9:C03  Guard Tour runs without stopping after a few hours.

5.40.9:C04  Custom schedules work as expected.

5.40.9:C05  Motion JPEG stream is no longer corrupted when rotated 90 and 270 degrees.

5.40.9:C06  Special characters in e-mail subject are now represented correctly.

5.40.9:C07  Frame size limit of Motion JPEG when saving to network drive works.

5.40.9:C08  HTTP port does not need to be specified when running RTP over 
            RTSP over HTTP.

5.40.9:C09  Ethernet driver has been improved.

5.40.9:C10  Default viewer set to still image does not affect configuration pages 
            where stream appearance is expected.

5.40.9:C11  HTTP notification in an action rule gives a valid URI.

5.40.9:C12  Setting parameter Network.DefaultRouter to a new value takes effect 
            even if the product is not restarted.

5.40.9:C13  The problem that camera reaches an error state at certain temperature is now fixed. 


Known Bugs/Limitations
======================

5.40.9:L01  It is recommended to unmount the SD Card before ejecting it.

5.40.9:L02  Recordings made with firmware earlier than 5.20 will not be readable
            on the SD Card from the 5.40 firmware. Backup important recordings and
            reformat the SD Card after the firmware upgrade.

5.40.9:L03  Remote back focus operation will be disabled when the temperature
            is too low. Information will be shown in system log.

5.40.9:L04  Check and repair is only available if the file system is ext4.

5.40.9:L05  Recording streams to SD Card with a total bit rate above 
            12Mbit/sec may cause missing frames/sequences.

5.40.9:L06  When using action rule resulting in short recordings, it is recommended
            to extend post-event time.

5.40.9:L07  With audio enabled, the initial connection latency is increased.

5.40.9:L08  Sometimes IR filter switches between ON/OFF after factory default when 
            illuminance is 7-10 lux.

5.40.9:L09  Color parameter when pulling RTSP stream with color=0 doesn't have effect.


Application Developer Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by the AXIS
P3344. For more information, please refer to the AXIS VAPIX HTTP API specification
version 3, part of the AXIS VAPIX API, available at www.axis.com.



Supported AXIS VAPIX API Image Resolutions for AXIS P3344

Resolution  Exceptions
==========  ==========

1280x800
1280x720
1024x768
1024x640
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
176x144
160x120
160x100
160x90

1440x900    1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)
80x50       1)

1) Not visible in web user interface