FIRMWARE RELEASE NOTE
=====================

Products affected:        P3227-LV/-LVE/P3228-LV/LVE

Release date:             2019-09-11

Release type:             Production

Firmware version:         9.40.1

Preceding release:        9.30.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.


New features in 9.40.1
================================================================================

9.40.1:F1
Added support for search functionality in help files.

9.40.1:F2
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F3
Added support for average bitrate control (ABR).

9.40.1:F4
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1:F5
Added support for Session Initiation Protocol (SIP).

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration.
This change only affects products in its factory defaulted state, products that
are already deployed in production systems are not affected by this update until
factory defaulted. For more information please see
https://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Added support for millisecond timestamps in JPEG header.


Features in 9.30.1
================================================================================

9.30.1:F1
Added an API for mDNS-SD.

9.30.1:F2
TLS1.0 and TLS1.1 is now disabled by default.

9.30.1:F3
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp.

The following parameters need to be configured prior to initiating a video
stream via SSM:

Network.RTP.R#.VideoAddress
Network.RTP.R#.VideoPort
Network.RTP.R#.AudioAdress
Network.RTP.R#.AudioPort

9.30.1:F4
Added support for TLSv1.3.

9.30.1:F5
The classic GUI has been deprecated and is now removed to increase overall cyber
security level.

9.30.1:F6
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.

9.30.1:F7
Updated Video Motion Detection to version 4.3.5.

9.30.1:F8
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.

9.30.1:F9
Added support for "Wait at least time x" before re-running an configured action
rule.

9.20.1:F1
Firmware is now signed by AXIS to increase overall minimum cybersecurity level.
More information about Signed Firmware can be found here
https://www.axis.com/support/faq/FAQ116424.

9.20.1:F2
Added support for dynamic power allocation via Link Layer Discovery Protocol
(LLDP) in addition to PoE-class based power allocation. This allows the switch
to allocate less power to the camera and potentially a greater number of PoE
devices can be connected to the switch.
LLDP can be enabled in Settings -> System -> PlainConfig -> Network -> LLDP POE
-> LLDP Send Max PoE.

9.20.1:F3
Upgraded Apache to version 2.4.38 to increase overall minimum cyber security
level.

9.20.1:F4
Updated Video Motion Detection to version 4.3.4.

9.20.1:F5
Added support for signed ACAP applications.

9.20.1:F6
Updated OpenSSL to version 1.1.1a to increase overall minimum cyber security
level.

9.10.1:F1
The following legacy VAPIX parameter have been removed due to non-usage:

Network.DHCP.Fqdn
Network.DHCP.IPCheckEnabled
Network.DHCP.Retries
Network.DHCP.StoreIPAddresseth0
Network.DHCP.StoreIPAddresseth1
Network.DHCP.Timeout

9.10.1:F2
Updated Video Motion Detection to version 4.3.3.

9.10.1:F3
Upgraded Apache to version 2.4.37 to increase overall minimum cyber security
level.

9.10.1:F4
Firwmare Recovery will also rollback the previous state of applications (ACAPs)
now.


Corrections in 9.40.1
================================================================================

9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.

9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.


Corrections in 9.30.1
================================================================================

9.30.1:C1
Corrected an issue that makes the text overlay visible in any resolution If the
text overlay is placed in the upper right, lower left or lower right corner.

9.30.1:C2
Corrected an issue that prevented the user from exporting recordings when the
camera was configured to Alaska timezone.

9.30.1:C3
Corrected an issue that prevented the user to play recordings as a viewer.

9.30.1:C4
Extended the charater limits for query string suffix in action rules in order to
allow for longer URLs.

9.20.1:C1
Corrected an issue that could cause the camera to get unresponsive when two
clients are streaming over multicast using the same streaming parameters.

9.10.1:C1
Corrected an issues that could cause an incorrect error message when testing
HTTP recipient.

9.10.1:C2
Increased the character limit for certificate IDs from 32 to 128 characters.

9.10.1:C3
Corrected an issue that caused RTSP client timeout to be delayed.

9.10.1:C4
Corrected an issue that caused an HTTP-recipient based action rule to fail when
the response from the server excluded the textual phrase (Example: HTTP 200).
This will work now.

9.10.1:C5
Corrected an issue that caused image quality degradation when a snapshot was
taken via VAPIX.

9.10.1:C6
Corrected an issue that caused the temperature information delivered via SNMP
OID to be corrupted.

8.40.2.1:C1
General minor improvements to the 8.40 LTS platform.

8.40.2.1:C2
Updated Apache to version 2.4.39 to increase overall minimum cyber security
level.

8.40.2.1:C3
Improved robustness of the O3C client.

8.40.2.1:C4
Updated OpenSSL to version 1.1.1b to increase overall minimum cyber security
level.

8.40.2.1:C5
Updated OpenSSH to version 7.9p to increase overall minimum cyber security
level.

8.40.2.1:C6
#Affected Product #Q1785-le
Corrected a clock synchronization issue that could occur after
a power loss if time zone has been set manually.

8.40.2.1:C7
#Affected Chip #Artpec-6
Corrected an issue when changing resolution while cropping a
streamed image with the VAPIX parameter croppos.

8.40.2.1:C8
Added information about Certificate ID to the Installed Certificates section in
the server
report.


Known Bugs/Limitations
================================================================================

9.40.1:L1
There might be event settings available that is not applicable to the product
with the current setup.

9.40.1:L2
If the product is disconnected while the T61xx is running, the T61xx needs to be
restarted before the product is re-connected.

9.30.1:L1
There might be features currently explained in the help files that may not be
supported by the camera.

9.20.1:L1
There might be event settings available that is not applicable to the product
with the current setup.

9.20.1:L2
If the camera is disconnected while the T61xx is running, the T61xx needs to be
restarted before the camera is re-connected.

9.10.1:L1
It is recommended to perform firmware recovery to rollback the products firmware
to a previous version.

Downgrading the products firmware through the usual firmware upgrade process can
cause configuration and ACAP loss. It is recommended to perform a factory
default afterwards.

9.10.1:L2
Parts of the privacy mask may become invisible in rare occasions during
configuration. If this happens, please try to modify the mask slightly.

9.10.1:L3
If using any of following analytics VMD/CLD/DAT/Guard Suite (Motion, Fence &
Loitering) together with view areas and digital PTZ, the detection is offset and
therefore will give an inaccurate detection.

8.40.2.1:L1
It is recommend to refresh the browser with F5 after doing a FW upgrade from FW
6.xx to 8.xx or higher in order to show all the new settings in the web-
interface.


Supported AXIS VAPIX API Image Resolutions for P3227-LV/-LVE/P3228-LV/LVE
================================================================================

Resolution  Exceptions
==========  ==========

3840x2160   2)
3072x1728
2592x1944   2)
2560x1920   2)
2560x1600
2304x1728
2592x1458
2560x1440
2048x1536
1920x1440
2048x1152
1920x1200
1920x1080
1600x1200
1440x1080
1600x900
1440x900
1280x960
1280x800
1280x720
1024x768
960x720
1024x640
800x600
800x500
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
160x120
160x100
160x90

2816x1584   1)
2432x1824   1) 2)
2304x1296   1)
1728x1296   1)
1400x1050   1)
1024x576    1)
960x540     1)
768x576     1)
720x576     1)
854x480     1)
704x576     1)
800x450     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x144     1)
176x120     1)
96x64       1)
80x60       1)
80x50       1)

1) Not visible in web user interface
2) 4K @ 25/30 fps