FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS P1346/P1346-E Network Camera

Release date:      2011-10-28

Release type:      Production

Firmware version:  5.40.4

File name:         P1346_5_40_4.bin

Preceding release: 5.40.1

AMC version:       6.0.6.3-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.

Release 5.40.4
===============

Corrections since 5.40.1
========================

5.40.4:C01 Improved memory handling when using motion detection.

5.40.4:C02 Corrected date string format in SMTP.

5.40.4:C03 I/O trigger data is now included in the video stream as expected.

5.40.4:C04 The relay output triggering via ONVIF interface now works.

5.40.4:C05 Up to 127 characters can now be used in the 'From email address' field.


Known Bugs/Limitations
======================


5.40.4:L01 It is recommended to unmount the SD Card before ejecting it.

5.40.4:L02 Recordings made with an earlier firmware than 5.20 will not be readable
           on the SD Card from the 5.40 firmware. Backup important recordings and
           reformat the SD Card after the firmware upgrade.

5.40.4:L03 Stream Profiles are not associated with any particular View area. They
           are profiles that can be used with any view area. The View area is not
           saved with the Stream Profile.

5.40.4:L04 Remote back focus operation will be disabled when the temperature
           is too low. Information will be shown in system log.

5.40.4:L05 Check and repair is only available if the file system is ext4.

5.40.4:L06 Recording streams to SD Card with a total bit rate above 
	   12Mbit/sec may cause missing frames/sequences.

5.40.4:L07 When using action rule resulting in short recordings it is recommended
	   to extend post-event time.

5.40.4:L08 With audio enabled, the initial connection latency is increased.

5.40.4:L09 Sometimes IR filter switches between ON/OFF after factory default when 
           illuminance is 7-10 lux.

5.40.4:L10 Sensor capture mode should be set during the initial product
           configuration as it affects the available resolutions. Changing it in 
           real time requires other resolution related configuration changes on the 
           camera and possibly a recording software. For example, if a resolution 
           that is not available for one capture mode is requested, the reply will 
           be "bad request".

5.40.4:L11 To get smoother H.264 video in Live view in 3MP and HDTV highest
           resolution, it may be necessary to disable both "Advanced video
           rendering" and "Enable overlays" in the Control Panel -> AXIS Media
           Control.

5.40.4:L12 Local recording playback fails when using Motion JPEG with resolution
           2048x1536 and associated audio. Workaround: Use H.264 instead.

 
 
Application Developer Information
=================================

The AXIS VAPIX Application Programming Interface is supported by the
AXIS P1346/P1346-E.

The following groups are supported by this product.
For more information, please refer to the AXIS VAPIX HTTP API specification
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Group                  Exceptions
=====                  ==========
General
Image and Video
Motion Detection
I/O
IP filter
Audio
Active Storage
Capture mode
Digital PTZ
View Areas
Temperature control    Not Fan/Heater
Focus Assistant
Remote Zoom and Focus  Only Remote Back Focus
Positionable Iris

Built in templates for dynamic parameters are:

Template               Group
========               =====
'button'               PTZ.Auxiliary.A1.Button
'customexposurewindow' ImageSource.I#.Sensor
'daynightaction'       Event.E#.Actions
'event'                Event
'ftp_config'           EventServers.FTP
'ftpaction'            Event.E#.Actions
'guardtour'            GuardTour
'guardtouraction'      Event.E#.Actions
'http_config'          EventServers.HTTP
'httpaction'           Event.E#.Actions
'hwaction'             Event.E#.Actions
'motion'               Motion
'position'             PTZ.Preset.P#.Position
'ptzaction'            Event.E#.Actions
'recordaction'         Event.E#.Actions
'smtpaction'           Event.E#.Actions
'streamprofile'        StreamProfile
'tcp_config'           Eventservers.TCP
'tcpaction'            Event.E#.Actions
'tour'                 GuardTour.G#.Tour

Supported AXIS VAPIX API Image Resolutions for AXIS P1346/P1346-E.

Resolution  Exceptions
==========  ==========

2048x1536   2)
1920x1080   3)
1600x1200   4)
1280x1024
1280x960
1280x720
1024x768
800x600
800x450
640x480
640x360
480x360
480x270
320x240
320x180
240x180
176x144
160x120
160x90

1440x900    1)
768x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)

1) Not visible in web user interface
2) Only available in 3MP capture mode
3) Not available in 2MP capture mode
4) Not available in HDTV capture mode