FIRMWARE RELEASE NOTES
			======================

Products affected: AXIS P1346 Network Camera

Release date:      2012-02-13

Release type:      Production

Firmware version:  5.06.2

File name:         P1346_5_06_2.bin

Preceding release: 5.06.1

AMC version:	   5.4.17.22-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named 
howtoupgrade.txt.


RELEASE 5.06.2
==============

Improvements since 5.06.1
=========================

5.06.1:I01 Support for new hardware with HWID 19A and 19A.1

Known limitations
=================

5.06.2:L01 Daylight saving time does not work for Iran.

5.06.2:L02 If you enable HTTPS and enable anonymous view, the motion detection 
	   page will not work correctly.

5.06.2:L03 Remote back focus and zoom operation will be disabled when the 
           temperature is too low. Information will be shown in system log.

5.06.2:L04 To playback Matroska files generated by the camera on a computer 
           you need to have the configuration file ('.conf') in the same folder 
           as the Matroska file ('.mkv') to be able to play it. For more 
           information see: 
           http://www.axis.com/techsup/software/matroska/files/readme.txt

5.06.2:L05 With audio enabled, the initial connection latency is increased.

5.06.2:L06 The resolution 240x135 is shown as 240x136 in most players and 
           240x144 in Axis Media Control (AMC).

5.06.2:L07 When you change date/time format to be used in images, the format 
           in the image changes accordingly but the web page does not update 
           correctly.

5.06.2:L08 Selecting sensor capture mode shall be done during initial product 
           configuration as many different settings are affected and will need 
           to be reconfigured. Sensor capture mode affects the available resolutions 
           and changing it in real time requires other resolution related 
           configuration changes on the camera and possibly a recording software. 
           For example, if a resolution that is not available for one capture mode 
           is requested, the reply will be "bad request".

5.06.2:L09 The web interface does not take rotation and mirroring into account 
           when displaying the focus window or the motion detection page.

5.06.2:L10 The zoom, when using joystick, does not go all the way when you try 
           to zoom in. Release the joystick and twist again a couple of times 
           to reach max zoom. Same behaviour with zoom out. 

5.06.2:L11 To get smoother H.264 video in Live view in 3MP and HDTV highest 
           resolution, it might be necessary to disable both "Advanced video 
           rendering" and "Enable overlays" in the Control Panel>AXIS Media Control.

5.06.2:L12 Stream Profiles are not associated with any particular View area. They 
           are profiles that can be used with any view area. The View area is not 
           saved with the Stream Profile. 

5.05.2:L13 The focus changing mechanism might cause the audio trigger to be activated 
           if the internal mic is used.

5.06.2:L14 Two view areas can not have guard tours with the same name.

Application Developer Information
=================================

The AXIS VAPIX Application Programming Interface is supported by the AXIS P1346.

The following groups are supported by this product. 
For more information, please refer to the AXIS VAPIX HTTP API specification 
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Group		       Exceptions
=====		       ==========
General
Image and Video
Motion Detection
I/O
IP filter
Audio
Active Storage
Capture mode
Digital PTZ
View Areas
Temperature control	Not Fan/Heater
Focus Assistant
Remote Zoom and Focus	Only Remote Back Focus
Positionable Iris

Built in templates for dynamic parameters are:

Template	       Group
========	       =====
'button'	       PTZ.Auxiliary.A1.Button
'customexposurewindow' ImageSource.I#.Sensor
'daynightaction'       Event.E#.Actions
'event'		       Event
'ftp_config'	       EventServers.FTP
'ftpaction'	       Event.E#.Actions
'guardtour'	       GuardTour
'guardtouraction'      Event.E#.Actions
'http_config'	       EventServers.HTTP
'httpaction'	       Event.E#.Actions
'hwaction'	       Event.E#.Actions
'motion'	       Motion
'position'	       PTZ.Preset.P#.Position
'ptzaction'	       Event.E#.Actions
'recordaction'	       Event.E#.Actions
'smtpaction'	       Event.E#.Actions
'streamprofile'	       StreamProfile
'tcp_config'	       Eventservers.TCP
'tcpaction'	       Event.E#.Actions
'tour'		       GuardTour.G#.Tour

Supported AXIS VAPIX API Image Resolutions for AXIS P1346

Resolution  Exceptions
==========  ==========

2048x1536   2) 
1920x1080   3)
1600x1200   4)
1280x1024
1280x960
1280x720
1024x768
800x600
800x450
640x480
640x360
480x360
480x270
320x240
320x180
240x180
176x144
160x120
160x90

768x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)

1) Not visible in web user interface
2) Only available in 3MP capture mode
3) Not available in 2MP capture mode
4) Not available in HDTV capture mode