|
Video Source Configuration
|
| Parameter |
Description |
Range |
| Device ID |
This is the address of the connected device. This value corresponds to the value of the address switches in the connected device. |
1-256 |
|
| |
|
Driver Specific Settings
|
| Parameter |
Description |
Range |
| Flip pan |
If set to true, pan operations will be inverted |
true, false |
| Flip tilt |
If set to true, tilt operations will be inverted |
true, false |
|
| |
|
Mechanical limits
|
| Movement Limits |
Minimal value |
Maximal value |
Comment |
| Left |
-360 |
360 |
|
| Right |
-360 |
360 |
|
| Up |
0 |
-90 |
|
| Down |
0 |
-90 |
|
| Zoom Limits |
|
|
|
| Zoom wide |
0 |
255 |
|
| Zoom tele |
0 |
9999 |
|
| Optical Data |
|
|
|
| Min field angle |
1 |
999 |
|
| Max field angle |
1 |
999 |
|
The optical data limits are used to tune image centering:
- Zoom out completely and adjust Max Field Angle until the spot you click becomes centered accurately.
- Zoom in completely and repeat for Min Field Angle.
|
| |
|
Light Control
|
| Parameter |
Description |
Range |
| IR cut filter |
Set to on to enable the infrared cut filter. |
on, off |
| Back light compensation |
Set to true to use the back light compensation. |
true, false |
|
| |
|
Extended Driver Specific Settings
|
| Parameter |
Description |
Range |
| Goto preset delay |
Time (in seconds) it takes for the image to stabilize it self, after the camera has performed the longest "goto preset action". Used for disabling/enabling image analysis (e.g. motion detection). |
0-100 |
|