|
Continuous pan movement.
|
| When using a Daiwa DMP15-H1 unit, continuous pan movements may stop after 360 degrees. A new continuous pan command with a different speed will start the movement again.
|
| |
|
On Screen Display.
|
| On Screen Display is not supported when using a Daiwa DMP23-H2 unit.
|
| |
|
Video Source Configuration |
| Parameter |
Description |
Range |
| Device ID |
This is the address of the connected device. This value corresponds to the value of the address switches in the connected device. |
1-254 |
|
| |
|
Driver Specific Settings
|
|
There are no driver specific settings for this driver.
|
| |
|
Mechanical limits
|
| Movement Limits |
Minimal value |
Maximal value |
Comment |
| Left |
-180 |
180 |
|
| Right |
-180 |
180 |
|
| Up |
-180 |
180 |
|
| Down |
-180 |
180 |
|
| Zoom Limits |
|
|
|
| Zoom wide |
1 |
19999 |
The digital zoom range is 10000-19999. |
| Zoom tele |
1 |
19999 |
| Optical Data |
|
|
|
| Min field angle |
1 |
999 |
Min field angel is at max optical zoom. These settings are not used in this driver. |
| Max field angle |
1 |
999 |
|
| |
|
Light Control
|
|
There are no light control settings for this driver.
|
| |
|
Extended Driver Specific Settings
|
|
There are no extended driver specific settings for this driver.
|
| |
|
Supported on-screen display commands
|
| CGI Command |
Description |
PTZ Command |
| Open |
Open the on-screen display menu of the connected device. A menu will then appear in the image. |
|
| Close |
Not supported in this driver. |
|
| Back |
Not supported in this driver. |
|
| Select |
Select (or change) the current item in the internal menu. |
|
| Up |
Move one step up in the internal menu. |
|
| Down |
Move one step down in the internal menu. |
|
| Left |
Not supported in this driver. |
|
| Right |
Not supported in this driver. |
|
|