FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS M5013 PTZ Dome Network Camera
                   AXIS M5014 PTZ Dome Network Camera

Release date:      2012-06-14

Release type:      Production

Firmware version:  5.40.11

File name:         M5013_5_40_11.bin

Preceding release: 5.40.9.2

AMC version:       6.0.6.7-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named 
howtoupgrade.txt.


New Features
============

Corrections in 5.40.11 since 5.40.9.2
==================================

5.40.11:C01 The product can pan +-180 degrees.

5.40.11:C02 Hair-cross is not shown in live view.


5.40.11:C03 It's not possible to use joystick mode in M5013/M5014.

5.40.11:C04 Possible to use Japaneese language.



Known Bugs/Limitations
======================

5.40.11:L01  Pan and tilt operations are not available when using the T8412 Installation
            Display.

5.40.11:L02  Expired or not yet valid client certificates will be uploaded successfully 
            instead of being rejected.

5.40.11:L03  Playing a continuous recording for which the oldest parts are
            currently removed by automatic disk cleanup, will not show a correct
            start/stop time.

5.40.11:L04  When playing a continuous recording, the from and start time is not
            respected.

5.40.11:L05  If a customer is trying to upload a very large file instead of a
            valid language file, a "404 page cannot be displayed" page is 
            shown.

5.40.11:L06  Color parameter when pulling RTSP stream with color=0 doesn't have effect.

5.40.11:L07  Frame Size Control does not affect the size of the snapshot taken with 
            the upper right control that can be added to the Live View.

5.40.11:L08  Events triggered at the same time, will by default settings 
            share the same filename. This may result in upload of corrupted 
            image.

5.40.11:L09  Constant bit rate might fluctuate more than 10%. 

5.40.11:L10  Recording streams to SD Card with a total bit rate above 
            12Mbit/sec may cause missing frames/sequences.

5.40.11:L11  It is recommended to unmount the SD Card before ejecting it.

5.40.11:L12  Recordings made on the SD Card with firmware version earlier than 5.20 
            will not be readable from the 5.40 firmware. Backup important recordings and
            reformat the SD Card after firmware upgrade.

5.40.11:L13  Check and repair is only available if the file system is ext4.

5.40.11:L14  When using action rule resulting in short recordings, it is recommended
            to extend post-event time.

5.40.11:L15  Date modifiers "%m-%d-%Y" are not formatted correctly when used 
            with folder name, SMTP subject and message.

5.40.11:L16 Audio alarm sometimes not disabled during PTZ movements

5.40.11:L17  It's possible to se crosshair and to use emulated joystick with javaclient

5.40.11:L18  Info about emulated Joystick in live view help pages.

Application Developer Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by AXIS M5013/M5014.
For more information, please refer to the AXIS VAPIX HTTP API specification 
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Supported AXIS VAPIX API Image Resolutions for AXIS M5013/M5014.

Resolution  Exceptions
==========  ==========

1280x720    2)
800x600
800x450
640x480
640x360
480x360
480x270
320x240
320x180

1440x900    1) 2)
1024x768    1) 2)
1024x640    1) 2)
800x500     1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
640x400     1)
480x300     1)
384x288     1)
352x288     1)
352x240     1)
320x200     1)
240x180     1)
240x135     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x100     1)
160x90      1)
80x50       1)

1) Not visible in web user interface
2) Only available for M5014