FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS M3045-WV

Release date:      2017-10-13

Release type:      Production

Firmware version:  7.30.1.1

File name:         M3045-WV_7_30_1_1.bin

Preceding release: 7.30.1

--------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


Corrections in 7.30.1.1 since 7.30.1
====================================

7.30.1.1:C01
Added support for new type of NAND flash memory. Not possible to downgrade to
older firmware on cameras using new memory type, see FAQ 116355 for more
information.


Known Bugs/Limitations
================================================================================

7.30.1.1:L1
Recording streams to SD Card with total bit rate above 12Mbit/sec may cause
missing frames/sequences.

7.30.1.1:L2
Overlay images or overlay text are not included in the video stream when
streaming over HDMI.

7.30.1.1:L3
It is recommended to perform a factory default after downgrading the cameras
firmware if needed.

7.30.1.1:L4
The field of view (FOV) is reduced when streaming 1080i video over the HDMI port
compared to the cameras live view in 1080p.

7.30.1.1:L5
Video streaming H.264 for Safari has been temporarily disabled in the web-
interface because of an bug in the Safari browser.

7.30.1.1:L6
If the highest resolution is set on a view area, the full image (i.e. not the
cropped out view area) will be shown.

7.30.1.1:L7
Connecting to a camera will fail and result in "Unauthorized" message due to an
bug in Microsoft Edge 40 browser. This will be corrected by Microsoft in the
next version of Edge 41.

7.30.1.1:L8
An overlay text (e.g. date/time modifier) that has been configured in the
classic web-interface will be still shown in the new web-interface even though a
user might have disabled the overlay text there after firmware update. A user
need to disable the overlay text first in the classic web-interface using http
://ip-address/index.shtml.


Supported AXIS VAPIX API Image Resolutions for AXIS M3045-WV
================================================================================

Resolution  Exceptions
==========  ==========

1920x1080
1280x960
1280x720
1024x768
1024x576
800x600
640x480
640x360
352x240
320x240

768x576     1)
704x576     1)
704x480     1)
384x288     1)
352x288     1)

1) Not visible in web user interface