FIRMWARE RELEASE NOTES ====================== Products affected: AXIS M3044-V Release date: 2017-10-13 Release type: Production Firmware version: 7.30.1.1 File name: M3044-V_7_30_1_1.bin Preceding release: 7.30.1 -------------------------------------------------------------------------------- UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Corrections in 7.30.1.1 since 7.30.1 ==================================== 7.30.1.1:C01 Added support for new type of NAND flash memory. Not possible to downgrade to older firmware on cameras using new memory type, see FAQ 116355 for more information. Known Bugs/Limitations ================================================================================ 7.30.1.1:L1 Video streaming H.264 for Safari has been temporarily disabled in the web- interface because of an bug in the Safari browser. 7.30.1.1:L2 If the highest resolution is set on a view area, the full image (i.e. not the cropped out view area) will be shown. 7.30.1.1:L3 Connecting to a camera will fail and result in "Unauthorized" message due to an bug in Microsoft Edge 40 browser. This will be corrected by Microsoft in the next version of Edge 41. 7.30.1.1:L4 An overlay text (e.g. date/time modifier) that has been configured in the classic web-interface will be still shown in the new web-interface even though a user might have disabled the overlay text there after firmware update. A user need to disable the overlay text first in the classic web-interface using http ://ip-address/index.shtml. 7.30.1.1:L5 IEEE 802.1x configuration does not work in Microsoft Edge. 7.20.1:L1 Recording streams to SD Card with total bit rate above 12Mbit/sec may cause missing frames/sequences. 7.20.1:L2 The following features in Settings -> System will be displayed in English only as for now: Certificates, ONVIF, HTTPS, IEEE 802.1x, SNMP, Events, Stream profiles and Detectors. The current chosen language will not have any affect there. 7.20.1:L3 Corrected an issue that made the overlay text disappear when a client requested a new video stream. 7.20.1:L4 It is recommended to perform a factory default after downgrading the cameras firmware if needed. 7.20.1:L5 Features currently explained in the help files may not be supported in the camera. 7.20.1:L6 Camera is not inserting a new I-frame when a 2nd client requests a video stream via multicast through RTSP which results in additional waiting time before video streaming starts. 7.20.1:L7 Videos that have been recorded using the video capture feature in live view may not be playable some media players (e.g. VLC) as it is in an fragmented MP4 format without total video duration. 7.20.1:L8 It is not possible to start video streaming when the requesting client asked for a invalid or not supported resolution. Supported AXIS VAPIX API Image Resolutions for AXIS M3044-V ================================================================================ Resolution Exceptions ========== ========== 1280x720 1024x576 800x600 640x480 640x360 352x240 320x240 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface