FIRMWARE RELEASE NOTES
          ======================

Products affected: AXIS M3024-LVE Network Camera

Release date:      2013-07-04

Release type:      Production

Firmware version:  5.40.5

File name:         M3024-LVE_5_40_5.bin

Preceding release: N/A

AMC version:       6.0.6.7-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please 
follow the instructions from the user's manual, the web page at 
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named 
howtoupgrade.txt.


Release 5.40.5
=================

5.40.5 is the first official production service release for the AXIS M3024-LVE.


Known Bugs/Limitations
======================

5.40.3:L01 Removing and reinserting SD card during recording is not recommendable.

5.40.3:L02 Moving a view area doesn't always work as expected.

5.40.3:L03 Multiple simultaneous recordings to SD cards and network shares can 
	   degrade the performance of the system.

5.40.3:L04 Using modifiers like %c in a network share upload event does not work.

5.40.3:L05 It's not possible to trigger action rules based on temperature.

5.40.3:L06 A combination of a high bandwidth continuous recording and a lot of small
	   recordings can result in disc full. The automatic clean up will stop at
	   that point and the user has to manually remove recordings.

5.40.5:L07 Script error when pressing Create Certificate Request.

5.40.5:L08 DSCP value for Event/Alarm over IPv4 is always 0.

5.40.5:L09 Changing DSCP values might prompt for password.

5.40.5:L10 Privacy mask can't be added in Chrome.

5.40.5:L11 Number of different configured video streams are limited by hardware.

5.40.5:L12 Zoom bar is disabled until using zoom buttons.

5.40.5:L13 Compression input field accepts all type of characters.
	   Description: No warning is shown if Compression is set to Negative number,
	   higher than MAX or a non-integer.

5.40.5:L14 IR illumination action when IR illumination is disabled.
	   Description: IR cut filter switches even when IR Illumination is disabled

5.40.5:L15 Preset Reached event may trigger before reaching preset.


APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information please refer to the AXIS VAPIX HTTP API specification  version 3 part of the AXIS VAPIX API available at www.axis.com.

Supported AXIS VAPIX API Image Resolutions for AXIS M3024-LVE.

Resolution  Exceptions
==========  ==========
1280x800
1280x720
1024x640
800x600
640x480
640x400
640x360
480x360
352x240
320x240

1440x900     1)
1024x768     1)
768x576      1)
704x576      1)
704x480      1)
384x288      1)
352x288      1)

1) Not visible in web user interface