FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS M3014 Network Camera

Release date:      2010-06-18

Release type:      Production

Firmware version:  5.07

File name:         M3014_5_07.bin

Preceding release: 5.06.1

AMC version:	   5.4.17.13-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named 
howtoupgrade.txt.

RELEASE 5.07
==============

Modifications
=============

5.07:M01 Added support for new hardware revision.

5.07:M02 Improved image noise filtering (Lowering bandwidth usage).



Known limitations
=================

5.07:L01 The image is always showed with zero rotation at the Motion Detection
         and the Exposure settings page.

5.07:L02 The effect of backlight compensation on/off may not be noticable.

5.07:L03 Stream profile names are limited to alphanumerical characters.

5.07:L04 If IPv6 is enabled while IPv4 is disabled, the DHCP options received 
         from IPv4 are not removed. Also there is no IPv6 address in the mail 
         body of an SMTP test mail.

5.07:L05 The NTP implementation will not synchronize to NTP servers that
         signal an alarm condition (clock not synchronized) in its Leap
         Indicator.

5.07:L06 After changing the date/time of the camera, the video stream will 
         stop after 60 seconds with an RTSP session time out. It does not 
         matter if the media stream is started before or after the time is 
         changed.
         Workaround: Reboot the camera after the time has been changed 
         manually or by NTP.

5.07:L07 It is not supported to configure always multicast RTP.

5.07:L08 The event combination option "Include pre-trigger buffer" and "Upload
         as long as the trigger is active" does not work together, only the
         pre-buffer is saved/uploaded.
         Workaround: Use post buffer as well.

5.07:L09 When an event or event server is added, modified or deleted all 
         running events will be stopped and restarted.

5.07:L10 There is no boundary check when entering a motion detection window
         name. If the name is more than 1024 charachters long, the parhand
         application may restart.

5.07:L11 Sometimes when clicking on the save button after making changes to
         the exposure window setting, instead of the page reloading you get
         an error message on an otherwise empty page.

5.07:L12 If RTSP authentication is switched off, streaming H.264 with QuickTime
         and other Apple compatible clients will not work as they require 
         authentication of the RTSP, but do not allow HTTP authentication.

5.07:L13 The AXIS Media Control client may stop displaying the H.264 video 
         stream after the PC has been locked.
         Workaround: Reload the Live View page.

5.07:L14 Daylight saving time does not work for Iran.

5.07:L15 The resolution 240x135 will be stretched to 240x136 when using
         MPlayer or Quicktime. AMC will stretch the resolution to 240x144.

5.07:L16 If a customer is trying to upload a very large file instead of a
         valid language file, a "404 page cannot be displayed" page is shown.

5.07:L17 When the camera is under extreme network stress for a long time, H.264 clients
         have dropped off AMC.
	 Workaround: Use automatic re-connect in AMC.

APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface is supported by the AXIS M3014.

The following groups are supported by the M3014.
For more information, please refer to the AXIS VAPIX HTTP API specification 
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Group             Exceptions
=====             ==========
General
Image and Video   Video status
Motion Detection
IP filter
PTZ               PTZ driver update
                  PTZ administation
                  Set PTZ parameters
                  PTZ control queue

Built in templates for dynamic parameters are:

Template         Group
========         =====
'button'         PTZ.Auxiliary.A1.Button
'event'          Event
'external_video' ExternalVideo
'ftpaction'      Event.E#.Actions
'ftp_config'     EventServers.FTP
'guardtour'      GuardTour
'httpaction'     Event.E#.Actions
'http_config'    EventServers.HTTP
'hwaction'       Event.E#.Actions
'motion'         Motion
'position'       PTZ.Preset.P0.Position
'ptzaction'      Event.E#.Actions
'smtpaction'     Event.E#.Actions
'tcpaction'      Event.E#.Actions
'tcp_config'     EventServers.TCP
'tour'           GuardTour.G#.Tour

Supported AXIS VAPIX API Image Resolutions

Resolution  Exceptions
==========  ==========
1024x768
800x600
768x576
640x480
480x360
384x288
320x240
240x180
192x144
160x120
1280x720      1
800x450       1
640x360       1
480x270       1
320x180       1
240x135       1
160x90        1
1280x800      2
1024x640      2
800x500       2
640x400       2
480x300       2
320x200       2
160x100       2
704x576       3
704x480       3
352x240       3
352x288       3
176x144       3
176x120       3

1) Widescreen (16:9)
2) 16:10 format
3) Not equally scaled