FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS M1104 Fixed Dome Network Camera

Release date:      2010-03-05

Release type:      Production

Firmware version:  5.08

File name:         M1104_5_08.bin

Preceding release: n/a

AMC version:	   5.6.2.11-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named 
howtoupgrade.txt.


RELEASE 5.08
============

5.08 is the first official release for AXIS M1104.

Known limitations
=================

5.08:L01 If the status LED is set to flash when a video stream is accessed, the
         flashing stops after an AVHS dispatch. The flashing begins again if a
         new stream is accessed (e.g. if the live view is reloaded).

5.08:L02 Streaming of MJPEG over rtsp sometimes does not work for resolutions
         higher than 1024x768 in windows media player and mplayer.
         Workaround: Use VLC instead http://www.videolan.org/.

5.08:L03 Multicast for ipv6 will only work if ipv4 is enabled.

5.08:L04 When the camera is streaming to many clients simultaneously for a long time, clients
         have dropped off AMC.
         Workaround: Use automatic re-connect in AMC.

Application Developer Information
=================================

The AXIS VAPIX Application Programming Interface version3 is supported by AXIS M1103/M1104/M1113/M1114.

The following groups are supported by M1104.
For more information, please refer to the AXIS VAPIX HTTP API specification 
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Group             Exceptions
=====             ==========
General
Image and Video   Video status
Motion Detection
IP filter
PTZ               PTZ driver update
                  PTZ administation
                  Set PTZ parameters
                  PTZ control queue

Built in templates for dynamic parameters are:

Template         Group
========         =====
'button'                 PTZ.Auxiliary.A1.Button
'customexposurewindow'   ImageSource.I#.Sensor
'event'                  Event
'ftpaction'              Event.E#.Actions
'ftp_config'             EventServers.FTP
'guardtour'              GuardTour
'guardtouraction'        Event.E#.Actions
'httpaction'             Event.E#.Actions
'http_config'            EventServers.HTTP
'hwaction'               Event.E#.Actions
'motion'                 Motion
'position'               PTZ.Preset.P0.Position
'ptzaction'              Event.E#.Actions
'smtpaction'             Event.E#.Actions
'streamcache'            StreamCache
'streamprofile'          StreamProfile
'tcpaction'              Event.E#.Actions
'tcp_config'             Eventservers.TCP
'tour'                   GuardTour.G#.Tour



Supported AXIS VAPIX API Image Resolutions for M1104/M1114

Resolution  Exceptions
==========  ==========

1280x800
1280x720
1024x768
1024x640
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
176x144
160x120
160x100
160x90

1440x900    1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
192x144     1)
176x120     1)

1) Not visible in web user interface