FIRMWARE RELEASE NOTES
          ======================

Products affected: AXIS M1013 Network Camera

Release date:      2012-06-14

Release type:      Production

Firmware version:  5.40.5

File name:         M1013_5_40.bin

Preceding release: n/a

AMC version:       6.0.6.4-1

------------------------------------------------------------------------------
UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.

Release 5.40.5
=================

5.40.5 is the first official production release for the AXIS M1013/M1014

Features
======================

Known Bugs/Limitations
======================

5.40.3:L18122 Removing and reinserting SD card during recording is not
recommendable.

5.40.3:L24316 Check and repair is only available if the file system is ext4.

5.40.3:L29580 A combination of a high bandwidth continuous recording and a lot
of small recordings can result in disc full. The automatic clean up will stop
at that point and the user has to manually remove recordings.

5.40.3:L28435 It's not possible to download recordings bigger than 4GB from
the system.

5.40.3:L27901 Using modifiers like %c in a network share upload event does not
work.

5.40.3:L26145 Moving a view area doesn't always work as expected.

5.40.3:L28738 It's not possible to trigger action rules based on temperature.

5.40.3:L27653 Multiple simultaneous recordings to SD cards and network shares
can degrade the performance of the system.

5.40.5:L33936 Video stream becomes unaccessible while downloading crash report

5.40.5:L34090 DSCP value for Event/Alarm over IPv4 is always 0

5.40.5:L34091 Changing DSCP values might prompt for password

5.40.5:L34844 Privacy mask can't be added in Chrome

5.40.5:L35612 Video attributes might not be applied after a reboot

5.40.5:L35825 Zoom bar is disabled until using zoom buttons

5.40.5:L35026 Number of different configured video streams are limited by hardware.

APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by this product.
For more information please refer to the AXIS VAPIX HTTP API specification 
version 3 part of the AXIS VAPIX API available at www.axis.com.


Built in templates for dynamic parameters are:

Template               Group
========               =====
'button'               PTZ.Auxiliary.A1.Button
'event'                Event
'ftp_config'           EventServers.FTP
'ftpaction'            Event.E#.Actions
'guardtour'            GuardTour
'guardtouraction'      Event.E#.Actions
'http_config'          EventServers.HTTP
'httpaction'           Event.E#.Actions
'hwaction'             Event.E#.Actions
'mediaclip'            MediaClip
'motion'               Motion
'nsdevice'             NetworkShare
'position'             PTZ.Preset.P#.Position
'ptzaction'            Event.E#.Actions
'recordaction'         Event.E#.Actions
'smtpaction'           Event.E#.Actions
'streamcache'          StreamCache
'streamprofile'        StreamProfile
'tcp_config'           Eventservers.TCP
'tcpaction'            Event.E#.Actions
'tour'                 GuardTour.G#.Tour
'user_ctlqueue'        PTZ.UserCtlQueue

Supported AXIS VAPIX API Image Resolutions for AXIS M1013.

Resolution  Exceptions
==========  ==========
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
352x240
320x240

768x576      1)
704x576      1)
704x480      1)
384x288      1)
352x288      1)

1) Not visible in web user interface