FIRMWARE RELEASE NOTES
			======================

Products affected: AXIS M1011-W Network Camera

Release date:      2009-12-17

Release type:      Production

Firmware version:  5.00.1

File name:         M1011-W_5_00_1.bin

Preceding release: 5.00

AMC version:	   5_4_17_13-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


RELEASE 5.00.1
==============

Improvements in 5.00.1 since 5.00
==================================

5.00.1:I01 Tuned the image sensor settings to improve the image quality in low-light conditions.

Corrections in 5.00.1 since 5.00
================================


5.00.1:C01 Corrected issue with hidden SSID. It was only possible to establish a wireless 
           connection when the access point broadcasted the id of the wireless network. 
           Otherwise no connection would be established.

5.00.1:C02 Corrected issue when setting date causing the M10 to be a minute behind after 
           restart. 

5.00.1:C03 NTP synchronization correction when using wireless.

5.00.1:C04 Fixed issue where it wasn't possible to assign a username and password in the 
           Axis Camera Management.

5.00.1:C05 Corrected issue with flipping images causing false VMD events.


Known limitations
=================

5.00.1:L01 In the About page the copyright year is 1995-2008. It should read 1995-2009.

5.00.1:L02 When going to and selecting Basic Setup > Select Wireless the camera
           looses connection during the time wireless starts up.

5.00.1:L03 In Video & Audio > Audio Clips there is no explicit check that a correct
           audio file (.au) is uploaded.

5.00.1:L04 If using a privacy mask this might blink sometimes when saving settings.


Application Developer Information
=================================

The AXIS M1011-W supports AXIS VAPIX API - Application Programming Interface
version 3 which has not been published yet. Backwards compatibility is
maintained as far as possible, but some changes have been necessary.

The following groups are still supported from the AXIS M1011-W from
AXIS VAPIX HTTP API specification version 2, but discrepancies may occur.
For more information about version 2 please refer to AXIS VAPIX API available
at www.axis.com.

Group             Exceptions
=====             ==========
General
Image and Video   Video status
Motion Detection
IP filter

Built in templates for dynamic parameters:

Template             Group
========             =====
'event'              Event
'ftpaction'          Event.E#.Actions
'ftp_config'         EventServers.FTP
'httpaction'         Event.E#.Actions
'http_config'        EventServers.HTTP
'motion'             Motion
'smtpaction'         Event.E#.Actions
'tcpaction'          Event.E#.Actions
'tcp_config'         EventServers.TCP


Supported AXIS VAPIX API Image Resolutions:

Resolution  Exceptions
==========  ==========
640x480
480x360
320x240
240x180
176x144
160x120